[1] | L.F.M. da Silva, A. Ochsner and R.D. Adams, Handbook of adhesion technology. Springer-Verlag, Berlin, Heidelberg (2011). |
[2] | E.M. Petrie, Handbook of adhesives and sealants. McGraw- Hill, New York (2000). |
[3] | A.J. Kinloch, Adhesion and adhesives: science and technology. Chapman & Hall, London (1987). |
[4] | R.D. Adams, J. Comyn and W.C. Wake, Structural adhesive joints in engineering, 2nd edition. Chapman & Hall, London (1997). |
[5] | J-M. Berthelot, Composite materials, Mechanical behavior and structural analysis. New York: Springer (1999). |
[6] | M.W. Hyer, Stress Analysis of Fiber-Reinforced Composite Materials. McGraw-Hill Inc., New York (1998). |
[7] | J. N. Reddy, Theory and Analysis of Elastic Plates and Shells CRC, 2nd edition. Taylor & Francis, Philadelphia, PA (2006). |
[8] | S. Timoshenko and S. Woinowsky-Krieger, Theory of Plates and Shells 2nd Ed., McGraw-Hill, New York (1959). |
[9] | M.D. Banea and L.F.M. da Silva, Adhesively bonded joints in composite materials: an overview, Journal of Materials: Design and Applications, vol. 233, pp. 1-18 (2008). |
[10] | S. Iijima, Helical microtubules of graphitic carbon. Journal of Nature, vol. 354, pp.56-58 (1991). |
[11] | S. Iijima and T. Ichihashi, Single-shell carbon nanotubes of 1-nm diameter. Journal of Nature, vol. 363, pp. 603-605 (1993). |
[12] | S.C. Tjong, Structural and mechanical properties of polymer nanocomposites. Journal of Material Science and Engineering, vol. 53, Issue (3-4), pp. 73-197 (2006). |
[13] | K.T. Lau, C. Gu, G.H. Gao, H.Y. Ling and S.R Reid, Stretching process of single- and multi-walled carbon nanotubes for nanocomposite applications. Journal of Carbon, vol. 42, Issue (2), pp. 426-429 (2004). |
[14] | B.G. Demczyk, Y.M. Wang, J. Cumings,M. Hetman,W. Han, A. Zettl and R.O. Ritchie, Direct mechanical measurement of the tensile strength and elastic modulus of multiwalled carbon nanotubes. Journal of Material Science and Engineering, vol. 12, pp. 934-935 (2002). |
[15] | R. Saito,G. Dresselhaus and M.S. Dresselhaus Physical properties of carbon nanotubes. Imperial College Press, London (1998). |
[16] | M. Alexandre and P. Dubois, Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials. Journal of Material Science Engineering Reports, vol. 28, Issue (1-2), pp.1-63 (2000). |
[17] | K.T. Hsiao, J. Alms and S.G. Advani Use of epoxy/ multiwalled carbon nanotubes as adhesives to join graphite fiber reinforced polymer composites. Nanotechnology, vol. 14, Issue (7), pp. 791-793 (2003). |
[18] | J.A. Harris and R. Adams, An assessment of the impact performance of bonded joints for use in high energy absorbing structures. Proc International Mechanical Engineering, vol. 199(C2), pp. 121-131 (1985). |
[19] | C. Galliot,J. Rousseau and G. Verchey, Drop weight tensile impact testing of adhesively bonded carbon/epoxy laminate joints. International Journal of Adhesion and Adhesives, vol. 35, pp. 68-75 (2012). |
[20] | L. Goglio and M. Rossetto Impact rupture of structural adhesive joints under different stress combinations. International Journal of Impact Engineering, vol. 35, Issue (7), pp. 635-643 (2008). |
[21] | G.S. Ger, K. Kawata and M. Itabashi, Dynamic tensile strength of composite laminate joints fastened mechanically. Journal of Theoretical and Applied Fracture Mechanics, vol. 24, Issue (2), pp. 147–155 (1996). |
[22] | Kevin, K.A.Brown, R.Brooks and N.A. Warrior,The static and high strain rate behavior of a commingled E-glass/ polypropylene woven fabric composite. Composites Science and Technology, vol. 70, Issue (2), pp. 272-283 (2010). |
[23] | V.K. Srivastava and P.J. Hogg, Moisture Effects on the toughness, mode-I and mode-II of particles filled quasi-isotropic glass-fibre-reinforced polyester resin composites. Journal of Material Science. vol. 33, Issue (5), pp. 1129–1136 (1998). |
[24] | V.K. Srivastava, Effect of carbon nanotubes on the strength of adhesive lap joints of C/C and C/C–SiC ceramic fibre composites. International Journal of Adhesion and Adhesives, vol. 31, Issue (6), pp. 486–489 (2011). |
[25] | G.C. Jacob, J.M. Starbuck, J.F. Fellers and S. Simunovic, Strain rate effects on the mechanical properties of polymer composite materials. Journal of Applied Polymer Science, Vol. 94, pp. 296-301 (2004). |
[26] | R.L. Sierakowski, Strain rate effects in composites. Journal of Applied Mechanics Review, vol. 50, pp. 741-761 (1999). |
[27] | S. Barre,T. Chotard and M.L. Benzeggagh, Comparative study of strain rate effects on mechanical properties of glass fiber-reinforced thermoset matrix composites. Journal of Composite: Applied Science Manufacturing, vol. 27, pp. 1169-1181 (1996). |
[28] | M.S. Hamouda and M.S.J. Hashmi, Testing of composite materials at high rates of strain: advances and challenges. Journal of Material Processing Technology, vol. 7, pp. 327-336 (1998). |
[29] | M.J. Davis and D. Bond, Principles and practice of adhesive bonded structural joints and repairs. International Journal of Adhesion and Adhesives, 19(3), 91-105 (1999). |
[30] | P. Molitor, V. Barron and T. Young, Surface treatment of titanium for adhesive bonding to polymer composites: a review. International Journal of Adhesion Adhesives, vol. 21, Issue (2), pp. 129-136 (2001). |
[31] | J.S. Kim and D.H. Reneker, Mechanical properties of composites using ultrafine electrospun fibers. Journal of Polymer Composites, vol. 20, Issue (1), pp. 124-131 (1999). |
[32] | J.A. Chambers, Preloaded Joint Analysis Methodology for Space Flight Systems. NASA TM-106943 (1995). |
[33] | R.N. Rothon and M. Hancock, General principles guiding selection and use of particulate materials. In: Particulate- filled polymer composites. Rothon R. N. (ed) Longman Scientific and Technical, Harlow, P1 (1995). |
[34] | R. Senguptaa, M. Bhattacharyaa, S. Bandyopadhyayb and A.K. Bhowmicka, A review on the mechanical and electrical properties of graphite and modified graphite reinforced polymer composites, Journal Polymer Science, vol. 36, pp. 638-670 (2011). |
[35] | Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding, ASTM International, West Conshohocken, ASTM D5868-01 (2012). |
[36] | Standard Test Method for Tensile Properties of Plastics, ASTM International, West Conshohocken, ASTM D638 (2012). |
[37] | Terminology of Adhesives, ASTM International, West Conshohocken, ASTM D907 (2012). |
[38] | Guide for Use of Adhesive-Bonded Single-lap-Joint Specimen Test Results, ASTM International, West Conshohocken, ASTM D4896 (2012). |
[39] | Test Method for Tensile Properties of Adhesive Bonds, ASTM International, West Conshohocken, ASTM D897 (2012). |
[40] | Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading, ASTM International, West Conshohocken, ASTM D905 (2012). |
[41] | Test Method for Impact Strength of Adhesive Bonds, ASTM International, West Conshohocken, ASTM D950 (2012). |
[42] | Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal), ASTM International, West Conshohocken, ASTM D1002 (2012). |
[43] | Kaneka, http://www.kaneka.com.Retrieved (2012). |
[44] | Sigma Aldrich, http//www.sigmaaldrich.com (2012). |